In the past with FilterPro 2 there was the possibility to modify each component value individually and see the response change. In FilterPro 3.1 if I change one component it automatically adjust the ...

This thread has been locked. If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this ...

I am referring to the TIDA-010242 reference design for my 28V system. My system requires 500W. As I understand from the disturbance limits information, the minimum voltage is 12V (1s). You are correct ...

Since the 10.1 SDK is due within 2 months, and there are some notable bugs in 10.0, should we wait for a version 10.1 Linux Academy?

The max number of iterations is dictated by the number of accumulators in the hardware accelerator. Interference statistics (which uses the accumulators) determines the threshold values to be used in ...

I am facing an issue with balancing feature. I am trying to test external cell balancing via AFE through 0x0083 CB_ACTIVE_CELLS() command. It works in one hardware variant and not in other. What could ...

The random explosion occurred during the power on and off. We observed that the PWM could not be turned off normally to 0V, but was stuck at 5V. This caused the MOS to fail to turn off normally, ...

I am facing following problems while installing the MacOS installer of MCU-PLUS-SDK. It says the .dmg file is damaged and it cannot be installed. Could you please check this.

I have built an 8-to-1 inverting summing amplifier using OPA820 where, R_f = R = 1K (unity gain). However, I can see a reduction in pulse fall-time which I don't understand. Does anyone who the reason ...

Unfortunately PCM1792 and PCM1795 do not support DSD 128fs at all because DSD core only supports 64fs. So far there are no actual equipment information we have which supports DSD 5.6MHz by using our ...

Need your help to check below problem. V_CP1 is about 23V. This is for high side current sensing application. CS3_SP4 and CS3_SN4 are connected to a shunt resistor. When there is no current flow into ...